Modify

Opened 6 years ago

Closed 6 years ago

Last modified 4 years ago

#1244 closed enhancement (duplicate)

fonera 2.0n + 3G dongle Huawei e173u-i not working

Reported by: enresinado <tfa_@…> Owned by:
Priority: normal Milestone:
Component: fon-network-3g Version: N/A
Severity: unknown
Cc: Hardware: both

Description

Hi,

I have upgrade the firmware of fonera 2.0n to 2.3.7.0, but I keep receiving the message in dashboard that "UMTS is dialing in"...

What should I do?

Attachments (0)

Change History (4)

comment:1 Changed 6 years ago by enresinado <tfa_@…>

Some info that might be important:

cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh?= 1 B: Alloc= 0/800 us ( 0%), #Int= 2, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.21.7 dwc_otg_hcd S: Product=DWC OTG Controller S: SerialNumber?=lm0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr?= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh?= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=140c Rev= 0.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr?=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

cat /var/state/umtsd umtsd.umtsdstate.vendor= umtsd.umtsdstate.model= umtsd.umtsdstate.provider= umtsd.umtsdstate.signal= umtsd.umtsdstate.state=INIT umtsd.umtsdstate.tx=0 umtsd.umtsdstate.rx=0 umtsd.umtsdstate.online=1356643623 umtsd.umtsd.attached=1 umtsd.umtsd.device=option umtsd.umtsd.vidpid=12D1140C

comment:2 Changed 6 years ago by matthijs

Resubmitting the last comment with readable markup:

 cat /proc/bus/usb/devices

 T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 1
 B:  Alloc=  0/800 us ( 0%), #Int=  2, #Iso=  0
 D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
 P:  Vendor=0000 ProdID=0000 Rev= 2.06
 S:  Manufacturer=Linux 2.6.21.7 dwc_otg_hcd
 S:  Product=DWC OTG Controller
 S:  SerialNumber=lm0
 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
 I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
 E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

 T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=480 MxCh= 0
 D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
 P:  Vendor=12d1 ProdID=140c Rev= 0.00
 S:  Manufacturer=HUAWEI Technology
 S:  Product=HUAWEI Mobile
 C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA
 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
 E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
 E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
 I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
 E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
 E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
 I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
 E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
 E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
 I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
 E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
 E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

 cat /var/state/umtsd
 umtsd.umtsdstate.vendor=
 umtsd.umtsdstate.model=
 umtsd.umtsdstate.provider=
 umtsd.umtsdstate.signal=
 umtsd.umtsdstate.state=INIT
 umtsd.umtsdstate.tx=0
 umtsd.umtsdstate.rx=0
 umtsd.umtsdstate.online=1356643623
 umtsd.umtsd.attached=1
 umtsd.umtsd.device=option
 umtsd.umtsd.vidpid=12D1140C
 cat /var/state/umtsd
 umtsd.umtsdstate.vendor=
 umtsd.umtsdstate.model=
 umtsd.umtsdstate.provider=
 umtsd.umtsdstate.signal=
 umtsd.umtsdstate.state=INIT
 umtsd.umtsdstate.tx=0
 umtsd.umtsdstate.rx=0
 umtsd.umtsdstate.online=1356643623
 umtsd.umtsd.attached=1
 umtsd.umtsd.device=option
 umtsd.umtsd.vidpid=12D1140C

comment:3 Changed 6 years ago by matthijs

  • Hardware changed from 2.0n (FON2300) to both
  • Resolution set to duplicate
  • Status changed from new to closed
  • Type changed from request to enhancement
  • Version changed from 2.3.7.0 (Paco) to N/A

This ticket is a duplicate of #1023.

comment:4 Changed 4 years ago by Anjali

way to go..any plans for a moving aaeevgrs based system? I trade off of pivot based moving aaeevgrs and I'd like to automate the signals..don't mind if its a custom one as well. kindly let me know.

Add Comment

Modify Ticket

Action
as closed The ticket will remain with no owner.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.