Modify

Opened 7 years ago

Last modified 4 years ago

#906 investigate enhancement

Support 3G dongle: Huawei E122

Reported by: ptpjre@… Owned by:
Priority: normal Milestone:
Component: fon-network-3g Version: N/A
Severity: unknown
Cc: jon@… Hardware: both

Description

I am unable to get the Huawei E122 modem to work with the Fonera 2.0n router. This modem is supplied by the three.ie telecommunications company. I have installed the latest firmware 2.3.6.0 on the Fonera 2.0n but the modem is still not recognised.

Attachments (0)

Change History (8)

comment:1 Changed 7 years ago by matthijs

  • Component changed from unknown to fon-network-3g
  • Status changed from new to investigate
  • Type changed from request to bug

We're currently working on improvements to the 3G support that should help debugging 3G problems. We hope to get this out in the next release.

comment:2 Changed 7 years ago by magikscap@…

did you solve the problem? tnk

comment:3 Changed 7 years ago by jon@…

I have a similar problem (3G USB Modem Huawei E122) attempting to dial in to H3G in Italy with post-paid data subscription.

The modem is recognised and receives a UMTS signal (LED switches from green to blue), but hangs when it attempts to connect (Fonera message remains "UMTS is dialing in").

I have installed the latest dev version (http://download.fonosfera.org/LATEST/fonera2.0n-FON2300/20100824_FON2303_2.3.6.1_r1730_DEV.tgz) and modified the umstd file as follows:

etc/config/umstd

config 'umtsd' 'umtsd'

option 'pin' '2340'
option '_country' 'it'
option '_provider' 'it_5'
option 'apn' 'datacard.tre.it'
option 'dns' '62.13.171.2'

config 'umtsdstate' 'umtsdstate'

config 'umtsdevice' 'option12D11001'

option 'vendor' 'Huawei'
option 'device' 'E122'
option 'data' '/dev/ttyUSB0'
option 'cmd' '/dev/ttyUSB0'

cat /var/state/umtsd

umtsd.umtsdstate.vendor=

umtsd.umtsdstate.model=

umtsd.umtsdstate.provider=

umtsd.umtsdstate.signal=

umtsd.umtsdstate.state=INIT

umtsd.umtsdstate.tx=0

umtsd.umtsdstate.rx=0

umtsd.umtsdstate.online=1282582642

umtsd.umtsd.attached=1

cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh?= 1

B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0

D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1

P: Vendor=0000 ProdID=0000 Rev= 2.06

S: Manufacturer=Linux 2.6.21 dwc_otg_hcd

S: Product=DWC OTG Controller

S: SerialNumber?=lm0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr?= 0mA

I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub

E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh?= 0

D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1

P: Vendor=12d1 ProdID=1001 Rev= 0.00

S: Manufacturer=HUA WEI

S: Product=Huawei Mobile

C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr?=500mA

I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us

E: Ad=8a(I) Atr=03(Int.) MxPS= 16 Ivl=64ms

I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

E: Ad=85(I) Atr=02(Bulk) MxPS= 256 Ivl=0ms

E: Ad=05(O) Atr=02(Bulk) MxPS= 256 Ivl=31875us

I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

E: Ad=86(I) Atr=02(Bulk) MxPS= 256 Ivl=0ms

E: Ad=06(O) Atr=02(Bulk) MxPS= 256 Ivl=31875us

I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us

I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage

E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=31875us

comment:4 Changed 7 years ago by josessex@…

a workaround that usually works for me is plugging the modem in a linux or windows pc and make it work there. Make sure there is only one profile, to keep things simple. The parameters will be stored in the modem' s EEPROM (under *99#, wich is the default connection) and it can be plugged back in the FON and will (hopefully) connect.

comment:5 follow-up: Changed 5 years ago by matthijs

  • Hardware changed from 2.0n (FON2300) to both
  • Summary changed from Problem using Huawei E122 modem with fonera 2.0n to Support 3G dongle: Huawei E122
  • Type changed from bug to enhancement
  • Version changed from Unknown to N/A

As part of the upcoming 2.3.7.0 firmware release, we're reviewing old open tickets to see if they are still relevant, which is why you get this response now.

We will revamp the 3G point at some point in the future. When this happens, we'll need to revisit supporting this 3G stick as well.

comment:6 Changed 5 years ago by matthijs

  • Cc jon@… added

#946 is a duplicate.

comment:7 Changed 4 years ago by CharlesOl

Interesting helpful bugs noticed here. This is test post http://google.com

comment:8 in reply to: ↑ 5 Changed 4 years ago by anonymous

Replying to matthijs:

As part of the upcoming 2.3.7.0 firmware release, we're reviewing old open tickets to see if they are still relevant, which is why you get this response now.

We will revamp the 3G point at some point in the future. When this happens, we'll need to revisit supporting this 3G stick as well.

you´d better hurry. Soon we have forgotten all about 3g You might consider 4g support

Add Comment

Modify Ticket

Action
as investigate The ticket will remain with no owner.
Author


E-mail address and user name can be saved in the Preferences.

 
Note: See TracTickets for help on using tickets.